The Servo press is driven by the mechanical servomotor. They are designed for shaping applications, just as standard press machines. They are particularly efficient because they can manage the ram position, stroke length, slide profile, load value, torque, and speed. During operation, there is very little energy loss.

Servo presses have a lot of torque. They are capable of producing full output pressing force at any moment throughout an operation. You can know more about servo hydraulic press online via

Servo Electric Press - Q10 - YouTube

Image Source: Google


Control of processes has become increasingly important as manufacturers and designers test the limits of the materials they use, both new and old. Mechanical presses servo provide an abundance of data about speed, power as well as force and position. Servo mechanical presses do especially well in situations with high reverse tonnage and materials that have significant spring back tendency.


Hydraulic presses have been the most popular option for deep-forming applications because they can apply maximum force at any part of the stroke. This allows them to make components that require a servomechanical press with three times the capacity.

Many mechanical servo presses lose 50 percent of their tonnage by just one inch above the dead center at the bottom. The selection of the right size for servo presses generally mimics the process for a conventional press with particular attention given to the depth of forming of the items made.


The slide speeds are typically below 0.5 milliseconds. However, they are able to improve the speed of mechanical presses by increasing the speed outside of the working area of the stroke.